КРС-1 welding machine is designed for in-track flash-butt welding of rails with cross section of 6500 mm2 to 10000 mm2 during construction and repair of railroad tracks.
The machine comprises K 922-1 rail welding machine with upset force of 120 t with Siemens programmed control system, which allows performing welding using pulsed flashing. КРС-1 machine is equipped with a press for testing the reference samples of the welded rails.
|Overall dimension for transport according to GOST 9238-83||1-Т|
|Base on axis of vehicle coupling, mm||20320|
|Speed at transportation by a separate locomotive or as a part of a train, km/h||100|
|Speed with trailer train on the platform, km/h.||100|
|Speed in operation mode, km/h||5|
|Weight of trailer train, t||130 (пассажирский вагон
|Wheel tread diameter, mm||950|
|Fuel contents, t||2,4|
|Minimum radius of curve negotiation in horizontal profile, m||150|
|Weight of machine, t||70|
|Service staff (excluding personnel required for process operations), persons||2|
|Machine welding time for one rail joint, type P65, sec, at most||120|
|Capacity of power unit, kW, at least||315|
The following components are installed on the machine:
- diesel power plant with a capacity of at least 400 kVA,
- two-axle carriages,
- traction motors with thyristor speed control, which provides a smooth acceleration and movement of the machine with a trailed train set of up to 130 tons.
The machine includes:
- modern rail welding machine K 922-1 with an upset force of 120 tons, which allows to weld rail inserts without deformation of the insert in the form of a “loop”,
- press for testing control welded joints, a device for pulling up rails, technological equipment.