|
Welding plant of КУ010 type for welding
of cardan shafts
The original
welding plant is for semi-automatic welding of rotary bodies
in CO2 by solid and tube wire.
The welding
plant is designed for welding of girth welds of the
following joints:
- butt-welds
with and without grooving of edges;
- fillet and
lap welds.
Special
features of КУ010 welding plant.
- provides
the rotation of the article and electrode wire feed for two
welds with smooth speed regulation;
- smooth
regulation of welding current;
- enables the
adjustments for four fixed welding modes;
- is equipped
with devices for general and local exhaust of the welding
fumes;
- is
programmed for automatic switching off at the finishing of
welding.
Modes of
operation:
- setting;
- automatic.
Welding plant
consists of:
|
-
welding unit |
1 pc. |
|
- welding
rectifier |
2 pcs. |
|
- control
cabinet |
1 pc. |
|
- electrode
wire case |
2 pcs. |
|
- a set of
gas equipment |
1 pc. |
|
- connecting
and control cabinet |
1 set
|
|
-
replaceable and spare parts |
1 set |
Technical characteristics:
|
Name of
characteristic |
cost |
|
1. Rated 3-phase mains voltage, V |
380 |
|
2. Mains frequency, Hz |
50 |
|
3. Rated welding current on each arc at DC=60% and 5 min. welding
cycle, A |
500 |
|
4. Limits of welding current control, A |
60 - 500 |
5. Electrode wire diameter, mm
solid
tube |
1,2 - 2
1,2 - 3,2 |
|
6. Electrode wire feed speed, m/h |
120 - 1200 |
|
7. Rotation frequency of the article to be welded, rev/min |
0,6 - 6 |
|
8. Weight of electrode wire in case, kg |
30 |
|
9. Length of the article to be welded, mm |
300 - 2900 |
|
10. Diameter of the article to be welded, mm |
50 - 120 |
|
11. Air line pressure, MPa |
0,4 (4 атм.) |
12. Overall dimensions, mm
welding unit
welding current sources
control cabinet
electrode wire case |
3850x960x2550
790x600x955
700x650x1700
500x500x1410 |
13. Weight, kg
welding unit
welding current sources
control cabinet
electrode wire case, without wire |
750
260
170
40 |
|
14. Total occupied area for installation, m2 |
12 |
|
